Base Station for Reach M2 – Version 3.0

Description

Base Station for Reach M2! The M2BASE Kit turns your Reach M2 into a Multiband GNSS Base Station. Ready to use by connecting only your Emlid Reach M2. Up to 10 hours of continuous work!

More information Base Station for Reach M2

The M2BASE is a kit and complete solution that allows to convert the Emlid Reach M2 module into a Multiband Base Station Receiver, compatible with any universal tripod for GNSS receivers. It is a modular system that facilitates easy insertion of the Reach M2 and an Emlid LoRa Radio. The kit allows easy attachment and removal of the Reach M2.

(See all our Products and Kits here)

Watch M2BASE Kit Installation Video

THE SYSTEM IS EQUIPPED WITH:

• High Accuracy 44dB/42dB GNSS Multiband Antenna
• A cooling system with a low power 5V DC fan controlled by a temperature sensor PCB that permanently measures the temperature of the Reach M2.
• A set of Lithium Ion batteries with 10000mAh capacity. Tested for an estimated working time of up to 15 hours (First charge should be 24 hours)
• Internal wiring ready to connect the Reach M2 module (Does not include connection cable between M2 and LoRA Radio).
• 5/8″ thread for GNSS tripod.
• Physical characteristics of the kit:
  Weight: 350g ± 10g
  Dimensions: 130 x 80 x 80 mm

HIGH PRECISION GNSS MULTIBAND ANTENNA:
The most interesting feature of our M2BASE Kit is our new High Precision ceramic patch antenna compatible with the Reach M2 module that allows you to quickly obtain centimeter accuracy in Single/PPK/RTK mode:

Gain:
B2/L2/G2/B3/E5b/E6：42±2dB
B1/L1/G1/E1/E2：40±2dB
Horizontal coverage angle 360 degrees | Vertical coverage angle 5 – 90 degrees | Noise figure ≤1.5dB | Current consumption ≤50mA | Operating ambient temperature -40℃ to 85℃ | IP67 protection