skip to Main Content

Base Station for Reach M2 – Version 3.0!

$499

Base Station for the Reach M2! The M2Base KiT turns your Reach M2 into a robust Multiband GNSS Base Station – ready to use! Just plug in your Emlid Reach M2. Up to 15 hours of continuous operation! (Watch M2BASE KiT Installation Video)

The best low-cost L1/L2 GNSS Receiver Kit for use with the Reach M2 module.

The M2BASE is a kit and complete solution that allows to convert the Emlid Reach M2 module into a Multiband Base Station Receiver, screwable to any universal tripod for GNSS receivers. It is a modular system that allows easy insertion of the Reach M2 and an Emlid LoRa Radio (optional for multi-band RTK logging) using routed cabling so that the Reach M2 can be plugged in and properly powered. The kit allows the Reach M2 to be easily attached and removed..

THE SYSTEM IS EQUIPPED WITH:

  • High Accuracy 44dB/42dB GNSS Multiband Antenna
  • UA cooling system with a low power 5V DC fan controlled by a temperature sensor PCB that permanently measures the temperature of the Reach M2.
  • A set of Lithium Ion batteries with 10000mAh capacity. Tested for an estimated working time of up to 15 hours.
  • Internal wiring ready to connect the Reach M2 module (Does not include connection cable between the M2 and the LoRA Radio).
  • 5/8″ thread for GNSS tripod.
  • CPhysical characteristics of the kit:
    Weight: 350g ± 10g
    Dimensions: 130 x 80 x 80 mm

More information >>>

SKU: M2BASE KiT Category: Tags: , , , , , , , , , ,

Description

Base Station for Reach M2! The M2BASE KiT turns your Reach M2 into a Multiband GNSS Base Station. Ready to use by connecting only your Emlid Reach M2. Up to 10 hours of continuous work!

The M2BASE is a kit and complete solution that allows to convert the Emlid Reach M2 module into a Multiband Base Station Receiver, compatible with any universal tripod for GNSS receivers. It is a modular system that facilitates easy insertion of the Reach M2 and an Emlid LoRa Radio. The kit allows easy attachment and removal of the Reach M2.

(See all our Products and KiTS here)

Watch M2BASE KiT Installation Video

THE SYSTEM IS EQUIPPED WITH:

  • High Accuracy 44dB/42dB GNSS Multiband Antenna
  • A cooling system with a low power 5V DC fan controlled by a temperature sensor PCB that permanently measures the temperature of the Reach M2.
  • A set of Lithium Ion batteries with 10000mAh capacity. Tested for an estimated working time of up to 15 hours (First charge should be 24 hours)
  • Internal wiring ready to connect the Reach M2 module (Does not include connection cable between M2 and LoRA Radio).
  • 5/8″ thread for GNSS tripod.
  • Physical characteristics of the kit:
    Weight: 350g ± 10g
    Dimensions: 130 x 80 x 80 mm

HIGH PRECISION GNSS MULTIBAND ANTENNA:
The most interesting feature of our M2BASE Kit is our new High Precision ceramic patch antenna compatible with the Reach M2 module that allows you to quickly obtain centimeter accuracy in Single/PPK/RTK mode:

Gain:
B2/L2/G2/B3/E5b/E6:42±2dB
B1/L1/G1/E1/E2:40±2dB
Horizontal coverage angle 360 degrees | Vertical coverage angle 5 – 90 degrees | Noise figure ≤1.5dB | Current consumption ≤50mA | Operating ambient temperature -40℃ to 85℃ | IP67 protection

You may also like…

Back To Top
Start chat
1
💬 How can we help you today?
This Base Station for Reach M2 - Version 3.0! will improve your workflow. Obtain it for only $499!
If you have any questions, please ask us.
Escríbenos a gnss@mettatec.com