M2 BASE V.4

Base Station Kit for the Reach M2

with our new high precision GNSS Antenna

Turn your Reach M2 into a robust Multi-band GNSS Base Station. Ready to use!

Now with more WiFi signal range and viewing window.

USD$ 699

M2BASE: BASE STATION KIT FOR THE REACH M2

The best low-cost L1/L2 GNSS Kit for use with the Reach M2 module.

The M2BASE is a kit and complete solution that allows to convert the Reach M2 module into a Multi-band Base Station Receiver, screwable to any universal GNSS tripod. It is a modular system that allows easy insertion of the Reach M2 and a LoRa Radio (optional for multi-band RTK logging) using routed cabling so that the Reach M2 can be plugged in and powered. The kit allows the Reach M2 to be easily attached and removed.

THE SYSTEM HAS:

  1. Exclusive High Accuracy and High Gain Multi-band GNSS Antenna
  2. A cooling system with a fan controlled by a temperature-sensing PCB that permanently measures the temperature of the Reach M2.
  3. One set of Lithium Ion batteries with 10,000mAh capacity. Tested for an estimated working time of 10 hours. Allows battery charging while in operation.
  4. Internal wiring ready to connect the Reach M2 module (Does not include connection cable between Reach M2 and LoRA Radio).
  5. 5/8″ GNSS tripod thread.
  6. Physical characteristics of the kit:
    Weight: 350g ± 10g
    Dimensions: 130 x 80 x 80 mm

FOR INTEGRATION IS REQUIRED:

  1. One M2BASE Kit (includes GNSS Antenna)
  2. One Reach M2 module (not included). Note: Emlid antenna is not required
  3. Optional: One LoRa Radio (not included)
  4. Universal charger with 5V DC output and Micro-USB cable (not included)

KIT COMPONENTS:

  1. M2BASE Base Station Kit including: installed High Precision GNSS Antenna, temperature control system with internal fan, power management PCB board and Li-Ion batteries for 10 hours of uninterrupted use.
  2. Carrying bag.

HIGH PRECISION GNSS MULTIBAND ANTENNA:

Our new High Precision ceramic patch antenna compatible with the Reach M2 module allows you to quickly obtain centimeter accuracy in Single/PPK/RTK mode:

 

Gain:
B2/L2/G2/B3/E5b/E6:42±2 dB
B1/L1/G1/E1/E2:40±2 dB
Horizontal coverage angle 360 degrees | Vertical coverage angle 5 – 90 degrees | Noise figure ≤1.5dB | Power consumption ≤50mA | Operating ambient temperature -40℃ to 85℃ | IP67 protection.

COMPARISON TABLE BETWEEN THE EMLID REACH RS2 VERSUS THE M2BASE STATION KIT + GNSS EMLID REACH M2:

 RS2

M2BASE STATION KIT + M2

Electrical

Data

Electrical

Data

Autonomy 16 hrs as LTE RTK roverCorrections: NTRIP, RTCM3Autonomy 10 hrsCorrections: NTRIP, RTCM3
Battery LiFePO4 6400 mAh, 6.4 VPosition output: NMEA, LLH/XYZBattery Li-Ion 10,000 mAh, 5 VPosition output: NMEA, LLH/XYZ
External power input 6–40 VData logging: RINEXExternal power input 5 VData logging: RINEX with events
Charging USB Type-C 5 V, 2 AInternal storage: 16 GBCharging Micro USB  5 V,  2 AInternal storage: 16 GB

Positioning

GNSS

Positioning

GNSS

Static H: 4 mm + 0.5 ppm  V: 8 mm + 1 ppmSignal tracked:Static H: 4 mm + 0.5 ppmSignal tracked:
RTK H: 7 mm + 1 ppm  V: 14 mm + 1 ppmGPS/QZSS L1C/A, L2CRTK H: 7 mm + 1 ppmGPS/QZSS L1C/A, L2C

Connectivity

GLONASS L1OF, L2OF

Connectivity

GLONASS L1OF, L2OF
Lora Radio 868/915 MHzBeiDou B1I, B2ILora Radio 868/915 MHz (Sold separately)BeiDou B1I, B2I
Distance: Up to 8 kmGalileo E1B/C, E5bDistance: Up to 8 kmGalileo E1B/C, E5b
Wi-Fi: 802.11 b/g/n & Bluetooth: 4.0/2.1 EDRNumber of channels: 184Wi-Fi: 802.11 b/g/n & Bluetooth: 4.0/2.1 EDRNumber of channels: 184
Ports: RS-232, USB Type-CUpdate rates: Up to 10 HzPorts: USB, UART, EventUpdate rates: Up to 10 Hz

 RS2

Electrical

Data

Autonomy 16 hrs as LTE RTK rover

Corrections: NTRIP, RTCM3

Battery LiFePO4 6400 mAh, 6.4 V

Position output: NMEA, LLH/XYZ

External power input 6–40 V

Data logging: RINEX

Charging USB Type-C 5 V, 2 A

Internal storage: 16 GB

Positioning

GNSS

Static H: 4 mm + 0.5 ppm  V: 8 mm + 1 ppm

Signal tracked:

RTK H: 7 mm + 1 ppm  V: 14 mm + 1 ppm

GPS/QZSS L1C/A, L2C

Connectivity

GLONASS L1OF, L2OF

Lora Radio 868/915 MHz

BeiDou B1I, B2I

Distance: Up to 8 km

Galileo E1B/C, E5b

Wi-Fi: 802.11 b/g/n & Bluetooth: 4.0/2.1 EDR

Number of channels: 184

Ports: RS-232, USB Type-C

Update rates: Up to 10 Hz

M2BASE STATION KIT + M2

Electrical

Data

Autonomy 10 hrs

Corrections: NTRIP, RTCM3

Battery Li-Ion 10,000 mAh, 5 V

Position output: NMEA, LLH/XYZ

External power input 5 V

Data logging: RINEX with events

Charging Micro USB  5 V,  2 A

Internal storage: 16 GB

Positioning

GNSS

Static H: 4 mm + 0.5 ppm

Signal tracked:

RTK H: 7 mm + 1 ppm

GPS/QZSS L1C/A, L2C

Connectivity

GLONASS L1OF, L2OF

Lora Radio 868/915 MHz (Sold separately)

BeiDou B1I, B2I

Distance: Up to 8 km

Galileo E1B/C, E5b

Wi-Fi: 802.11 b/g/n & Bluetooth: 4.0/2.1 EDR

Number of channels: 184

Ports: USB, UART, Event

Update rates: Up to 10 Hz

Open chat
1
💬 How can we help you today?
Hi! 👋
Which of our GNSS Products are you interested in?